A Pinhole Camera

How to make a Pinhole Camera?

Step 1: Take two cardboard boxes one larger than the other such that one box slides into the other without any gap.

Step 2: Cut out open one side of each box. On the opposite side of the larger box cut a small hole in the center.

Step 3: On the opposite side of the smaller box cut a square of about 5 cm and cover this open area with a tracing paper.

Step 4: Slide the smaller box inside the larger one such that the side with the tracing paper is on the inside.

Step 5: Cover the camera and your head with a black cloth and then get ready to observe the distant objects.

Fig: A Pinhole Camera

It is a simple camera with a small aperture and forms an inverted image of the object.

A Pin-Hole Camera

How to prepare it
(1) Take two boxes so that one can slide into another with no gap in between them. Cut open one side of each box.
(2) On the opposite face of the larger box, make a small hole in the middle.
(3) In the smaller box, cut out from the middle a square with a side of about 5 to 6 cm.
(4) Cover this open square in the box with tracing paper (translucent screen).
(5) Slide the smaller box inside the larger one with the hole, in such a way that the side with the tracing paper is inside
Now it is ready to use
How to use it
(1) Hold the pin hole camera look through the open face of the smaller box. You should use a piece of black cloth to cover your head and the pinhole camera.
(2) Now focus on the object you want to capture in the camera. Make sure that the objects you wish to look at through your pinhole camera are in bright sun shine.
(3) Move the smaller box forward or backward till you get a picture on the tracing paper pasted at the other end

How the Images looks like pin-hole camera?
Upside down (inverted) images are formed. Image in a pin hole camera is real , inverted and smaller in size.

A pinhole camera that is used to capture the images of the sun is called Solography.
Natural Pin-hole Camera

When we pass under a tree covered with large number of leaves, we notice that small patches of sun light under it. These circular images are, in fact, pin hole images of the Sun. The gaps between the leaves, act as the pin holes. These gaps are all kinds of irregular shapes, but, we can see circular images of the Sun. This is called Natural Pin-Hole Camera
Rectilinear Propagation of Light

  • The property by which the light travels in a straight line is called rectilinear propagation of light.
  • The path travelled by a light in a straight line is identified with the help of a ray of light. The arrow head shows the direction of light(Figure 5 a).
  • A narrow group of light rays called a beam(Figure 5 b).
  • When beam of light moving away from each other is called divergent rays(Figure 5 c).
  • When beam of light moving towards each other and meet at a common point then it is called convergent rays(Figure 5 d).

Figure 5: Property of light.
 Producing a Beam of Light

  • We produce a beam of light by using a light box.
  • The light box is composed of a cardboard box with a tiny hole on one of its faces and an electric bulb.
  • When an electric bulb glows, the light comes out of the hole producing a beam of light.